Motor controllers
Programmable brushless motor controllers on the open VESC platform, up to 84 V, with CAN and UART interfaces.
The controllers we ship most are 75 V-class units rated for 84 V peak and several hundred amps, used one per motor on wheeled and tracked platforms. They run open-source firmware that your engineers can configure and update themselves.
Boards come open-frame with a heatsink plate or in sealed aluminium enclosures with cable glands for outdoor use.
Specifications
Typical range; final values per model and order.
| Voltage | Up to 84 V (20S lithium) |
|---|---|
| Current | 100 to 200 A continuous, 450 A class peak |
| Firmware | Open VESC-compatible |
| Interfaces | CAN, UART, PPM, ADC |
| Cooling | Aluminium plate or finned enclosure |
| Protection | Open frame, or IP54 to IP67 enclosed |
| Operating temperature | −20 to +60 °C |
How it ships
What we inspect before it leaves the factory
- Power-on, firmware version and hardware revision check
- Motor detection run on a test motor for a sample
- Enclosure seal and gland torque on enclosed units
Related
Other components from the same factory clusters.
Cameras and lenses
4K IP camera modules, thermal imaging units and matched lenses for navigation, inspection and recording on mobile platforms.
GNSS and navigation modules
Multi-constellation GNSS receiver modules and antennas for positioning and heading on outdoor platforms.
Motor and joint modules
Integrated motor modules for wheel drives and joints: motor, reducer and encoder in one IP67 housing.